《ChineseJournalofAeronautics》(《中國航空學報》(英文版)，ISSN1000-9361)創刊于1988年，為英文雙月刊,是由中國航空學會主辦、航空學報雜志社編輯出版的綜合性學術刊物,大16開銅版紙印刷，面向國內外公開發行。

　　《ChineseJournalofAeronautics》的辦刊宗旨是及時反映中國航空航天領域科學技術發展水平，交流國內外科技新成果，促進學術進步和人才成長，推動新理論、新技術的發展。主要讀者對象是航空航天技術領域科研機構的研究人員、大專院校航空航天相關專業的教師和研究生。

　　《ChineseJournalofAeronautics》擁有一個由國內外航空航天領域各專業的知名專家組成的編委會，所有稿件一律由相關專業的專家初審，并通過編委會的專家終審后才能最終發表。

　　《ChineseJournalofAeronautics》在國內航空航天領域具有相當高的知名度，是國內航空航天領域專業人士發表學術論文首選的專業學術期刊之一，曾在歷次期刊評比中屢獲殊榮，是我國工程技術類和力學類的核心期刊。

　　主要欄目有空氣動力學、飛行力學、自動控制、航空電子、發動機、材料、制造工藝及飛行器設計等。

　　《中國航空學報(英文版)》雜志榮譽：

　　收錄情況：

　　國外：1.美國《科學引文索引》(SCIE)2.美國《工程索引》(EICompendex)3.美國《國際航宇文摘》(IAA)4.美國《應用力學評論》(AMR)5.ElsevierScienceDirect數據庫6.sevierBibliographicDatabases7.美國航空航天AEROSPACE數據庫8.劍橋科學文摘(CSA)9.俄羅斯《文摘雜志》(AJ)。

　　國內：1.中國科學引文數據庫2.《中國期刊全文數據庫》(CJFD)3.萬方數字資源系統(WANFANG)4.維普中文科技期刊數據庫(CQVIP)5.《中國學術期刊文摘》。

　　閱讀推薦：南京航空航天大學學報

　　《南京航空航天大學學報》(社會科學版)(季刊)是1999年由非公開內刊《南航教育學報》轉變為公開發行，并更名而來的。學報的發展經歷了《教育研究與實踐》、《南航教育學報》到《南京航空航天大學學報(社會科學版)》三個階段20余年。在領導和作者的支持下，學報取得了長足的發展。《南京航空航天大學學報(社會科學版)》(季刊)是1999年由非公開內刊《南航教育學報》轉變為公開發行，并更名而來的。學報的發展經歷了《教育研究與實踐》、《南航教育學報》到《南京航空航天大學學報(社會科學版)》三個階段20余年。在領導和作者的支持下，學報取得了長足的發展。

　　中國航空學報英文版最新期刊目錄

Modelling and experimental investigation of frequency splitting of hemispherical resonator with machining errors

摘要：Hemispherical Resonator(HSR) is a typical high-performance component due to the complex coupling relationship between the machining errors and performance parameters. To understand the impact of machi...

Failure mechanism and quality evaluation in micro-resistance spot welds of braided Ag-plated Cu conductor to Cu interconnector

摘要：The service stability of flexible solar arrays relies on high-quality joints between braided Cu conductors and ultrathin interconnectors, which can be efficiently achieved through MicroResistance Spot...

A neural network response surface updating method for complex dynamic models based on modal matching reconstruction strategy

摘要：An integrated dynamic model updating method is proposed to address the challenges of mode jumping and mode degeneracy for complex dynamic models. A reduced order proxy model of Neural Network Response...

Adaptive fixed-time fuzzy fault-tolerant cooperative spiral-diving guidance law with initial state-independent prescribed performance

摘要：This paper proposes a novel performance guaranteed fixed-time fuzzy adaptive faulttolerant cooperative spiral-diving guidance law for a group of flight vehicles subject to system internal uncertaintie...

A self-learning refined model and tracking for near space hypersonic vehicle by space-based radar

摘要：The Near Space Hypersonic Vehicle(NSHV) features a unique design and propulsion system, achieving exceptional speed, range, and maneuverability, which challenge ground-based radars. Space-Based Radar(...

Three-dimensional cooperative guidance law with practical predefined-time approach angle and time-to-go convergence

摘要：This paper presents a Three-Dimensional(3D) cooperative guidance law with Practical Predefined-Time(PPT) convergence for multiple missiles considering approach angle(terminal lineof-sight) and simulta...

SAA-O²DINO:Oriented object detection transformer with improved denoising anchor boxes and shape-adaptive assigner

摘要：In contrast to the nearly fixed flying altitude of satellite remote sensing platforms, aerial remote sensing（e.g., unmanned aerial vehicles） often employs oblique photography at varying flying altitud...

Surface partitioning and iso-scallop field-based five-axis machining method with a non-spherical cutting tool

摘要：The machining performance of five-axis machining can be significantly enhanced by partitioning the surface into subregions, each employing an adaptive machining strategy. This approach is particularly...

Sustainable electrochemical arc machining of SiCp/Al composites from current signals and energy control to applications

摘要：Electrochemical Arc Machining（ECAM） has demonstrated considerable potential for efficient machining of difficult-to-cut materials. However, the relationships between machining signals and material rem...

Constrained RLV guidance via pseudospectral model predictive convex programming and predefined-height sliding mode approach

摘要：Online trajectory generation and tracking for the Terminal Area Energy Management(TAEM) phase of a Reusable Launch Vehicle(RLV) is one of the core technologies for achieving a soft landing. The proces...

Effect of silane coupling agents on interfacial features and joint performance of ultrasonically welded AA6061 aluminum alloy to carbon fiber reinforced PA6

摘要：The use of Silane Coupling Agent(SCA) is an important way to improve the joining quality between metal and plastic. However, how to rationally use SCAs is still lack of guidance.We investigate the eff...

Guide for Authors

摘要：<正>About Journal Chinese Journal of Aeronautics(CJA) is a comprehensive academic journal dealing with the fields of aeronautics and astronautics. It reports researches concerning the two fields ...

Special Issue Airborne Maneuvering Network(AMN) and Application

摘要：<正>Airborne Maneuvering Network (AMN),consisting of near-space maneuvering platforms,high-altitude long-endurance UAVs,and low-altitude maneuvering UAVs,is a novel network that can achieve wide-...

Origami principle in space deployable membrane structures: Mechanism, application and prospects

摘要：The accelerated evolution of space technology has elevated the importance of high power and lightweight attributes in satellite design. In response to the conflict between the demand for large-scale, ...

A unified framework for small object analysis in UAV imagery: Tracking single target from multiple detected targets

摘要：A framework for visual small target detection and tracking is introduced, leveraging Unmanned Aerial Vehicle(UAV) Remote Sensing Images(RSIs). The proposed Cropped Target Detection and Tracking(CTDT) ...

Ablation behavior of Hf-Zr-modified silicon-based ceramic coatings prepared by polymer derived ceramics and gaseous silicon infiltration

摘要：To improve the ablation resistance of C/C composite at temperatures exceeding 2000 ℃,a（Hf-Zr）C-SiC Ultra-High Temperature Ceramic（UHTC） coating was prepared by Polymer Derived Ceramics（PDCs） and Gaseo...

A dynamic function allocation method for single pilot operations in commercial aircraft based on Bayesian-enhanced Q-learning

摘要：Human-machine collaboration is a key feature of Single Pilot Operations(SPO). With only a single pilot in the cockpit, workload monitoring and adjustment become even more critical compared to Dual-Pil...

Privacy-preserving average consensus for multi-agent systems based on edge decomposition

摘要：This paper studies the problem of privacy preservation in achieving the average consensus of dynamic Multi-Agent Systems（MAS）. Average consensus performs an essential role in dynamic MAS to promote co...

Survey on HA2G and A2A channel measurement and modeling for airborne maneuvering networks

摘要：Airborne Maneuvering Networks(AMNs), composed of Near-Space Maneuvering Platforms(NS-MPs), High-Altitude Long-Endurance UAVs(HALE-UAVs), and Low-Altitude Maneuvering UAVs(LA-UAVs), are envisioned as a...

Circumferential discharge uniformity of a coaxial pulsed plasma thruster

摘要：Pulsed Plasma Thrusters(PPTs) provide significant advantages in microsatellite applications. However, non-uniform circumferential discharge has been identified during the design and testing of coaxial...

　　相關科技期刊推薦

• 省級上海理工大學學報(社會科學版)
• 省級 城市
• 省級上海理工大學學報(社會科學版)
• 國家級中國工程咨詢
• 北大核心科技導報
• 北大核心水處理技術
• 省級中國地理科學英文版
• 省級內燃機與動力裝置
• 國家級城鎮供水
• 省級鄭州航空工業管理學院學報(社會科學版)
• 國家級汽車與駕駛維修
• 省級孝感學院學報
• 北大核心沉積學報
• 省級內蒙古石油化工
• 省級機床電器
• 北大核心改革與戰略
• 北大核心建筑機械化
• 國家級國防科技工業
• 北大核心電源技術
• 國家級煤炭加工與綜合利用
• 國家級天然氣勘探與開發
• 省級路基工程
• 北大核心金剛石與磨料磨具工程
• 省級西安航空技術高等�？茖W校學報雜志
• 國家級江漢石油科技
• 省級機械管理開發
• 國家級冶金信息導刊
• 省級安徽工業大學學報(自然科學版)
• 國家級電力勘測設計
• 國家級油田地面工程

　　核心期刊推薦

上海紡織科技

現代食品科技

華中科技大學學報(社會科學版)

華中科技大學學報(醫學版)